 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number: EN 1229C Thick Film Hybrid IC STK4362 AF Power Amplifier (10W + 10W min, THD = 1.0%) Features * Capable of guaranteeing substrate temperature 125C, thereby reducing heat sink. * Excellent cost performance. Package Dimensions unit: mm 4033 [STK4362] Specifications Maximum Ratings at Ta = 25C Parameter Maximum supply voltage Thermal resistance Junction temperature Operating substrate temperature Storage temperature Available time for load short-circuit Symbol VCC max j-c Tj TC Tstg ts VCC = 33V, RL = 8, PO = 10W, f = 50Hz Pin 4 to 7, 12 One power transistor Conditions Ratings 50 5 150 125 -30 to +125 2 Unit V C/W C C C s Recommended Operating Conditions at Ta = 25C Parameter Recommended supply voltage Load resistance Symbol VCC RL Conditions Ratings 33 8 Unit V SANYO Electric Co., Ltd. Semiconductor Business Headquarters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN 61297HA (ID) / 8058MO / 2043KI, TS No. 1229--1/6 STK4362 Operating Characteristics at Ta = 25C, VCC = 33V, RL = 8, Rg = 600, VG = 40dB, at specified Test Circuit (based on Sample Application Circuit). Parameter Quiescent current Output power PO (2) Total harmonic distortion Frequency response Input impedance Output noise voltage THD fL, fH ri VNO Symbol ICCO PO (1) Conditions VCC = 38V THD = 1.0%, f = 1kHz THD = 1.0%, f = 30Hz to 20kHz Po = 0.1W, f = 1kHz Po = 0.1W, +0 dB -3 20 to 100k 120k 0.8 min 20 10 5 0.3 typ 60 max 120 Unit mA W W % Hz mVrms Po = 0.1W, f = 1kHz VCC = 38V, Rg = 10k Notes. Unless otherwise specified for the power supply at the time of test, use the constant voltage power supply. When testing the available time for load short-circuit and output noise voltage, use the specified transformer as shown right. The output noise voltage is the peak value on the mean value indicating rms reading (VTVM), and should not involve impulse noise. Specified Transformer Power Supply (Equivalent to RP-22) Equivalent Circuit No. 1229--2/6 STK4362 Sample Application Circuit: 10W min 2-channel AF power amplifier Input voltage, Vi - mV Total harmonic distortion, THD - % Output power, PO - W Output power, PO - W Output power, PO - W Frequency, f - Hz Response - dB Frequency, f - Hz No. 1229--3/6 Output noise voltage, VNO - mVrms Output power, PO - W Response - dB Frequency, f - Hz Supply voltage, VCC - V Power supply ripple voltage, Vrp - mVrms Quiescent current,IIcco AmA Current drain, CC - Quiescent current, ICCO - mA Input resistance, ri - k Frequency, f - Hz Supply voltage, VCC - V Quiescent current, Icco--V Neutral voltage, VN mA STK4362 Output noise voltage, VNO - mVrms Signal source resistance, Rg - No. 1229--4/6 Thermal resistance heat sink, - C/W IC Power dissipation, Pd - W Midpoint voltage, VN - V Output power, PO - W Operating substrate temperature, Tc - C Area of heat sink, S - cm2 Quiescent current, ICCO - mA Quiescent current, Icco - mA Current drain, ICC - A Load Short current, Ishort - A Supply voltage, VCC - V Frequency, f - Hz STK4362 0.2V / div 0.5s / div No. 1229--5/6 STK4362 1V / div 0.5s / div s No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees, jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. s s This catalog provides information as of June, 1997. Specifications and information herein are subject to change without notice. No. 1229--6/6 |
Price & Availability of STK4362
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |